Des Moines Wood Floors: Wood Floor Refinishing in Norwalk, IA

Getting a new Norwalk floor flat before it goes down

New construction in Norwalk is fast, and subfloor flatness is the thing that gets left behind when a schedule tightens. The tolerance that matters is 3/16 of an inch over ten feet. Past that, a floating floor flexes at the seams and a glued floor bonds in some places and not others, which you hear underfoot as a hollow spot for the next thirty years.

It is measured with a straightedge in twenty minutes and corrected with levelling compound in a day. Nobody has ever regretted the day. Plenty of people have lived with what happens when it was skipped.

What we are asked for most here: subfloor preparation and levelling, floating floor installation, glue-down wood flooring, engineered hardwood installation.

What we install in Norwalk

LVP and floating floors

• Luxury Vinyl Plank Installation, laying LVP where moisture rules out real wood
• Floating Floor Installation, a click-together floor not fastened to the subfloor
• LVP vs Hardwood Cost, what you give up for the lower number
• Subfloor Preparation and Levelling, flattening, drying and fastening what goes under the floor

Refinishing

• Hardwood Floor Refinishing, sanding a floor back to bare wood and building a new finish on top
• Dustless Floor Sanding, sanding with the dust pulled straight off the drum instead of into your house
• Sand and Finish, the full three-pass sand and a fresh coat system
• Screen and Recoat, abrading the old finish and adding a coat without sanding to wood
• Hardwood Floor Restoration, bringing a neglected or carpet-covered floor back into service

Finishes and colour

• Hardwood Floor Staining, changing the colour of the wood before the finish goes on
• Water-Based Polyurethane Finish, the low-odour finish that dries clear and lets you back in sooner
• Oil-Based Polyurethane Finish, the amber-toned finish that wears longest and smells the most
• Hardwax Oil Finish, a penetrating finish you can spot-repair instead of resanding
• Matte, Satin or Gloss, how much sheen hides dust, scratches and Iowa winters

Repairs

• Hardwood Floor Repair, replacing damaged boards and blending them into the existing floor
• Board Replacement and Weaving, cutting out bad boards and weaving new ones in so the repair disappears
• Water-Damaged Floor Repair, drying, flattening and replacing what a leak or a flood lifted
• Squeaky Floor Repair, finding and fastening the movement that makes the noise
• Gap and Cupping Repair, diagnosing whether the movement is seasonal or a moisture fault
• Pet Stain and Scratch Repair, removing urine staining that has reached the wood, and refinishing over it

What it costs

• Hardwood Floor Refinishing Cost, what a sand and finish actually costs in this market, room by room
• Hardwood Floor Installation Cost, material plus labour, and what changes the number
• Cost to Refinish 1,000 Sq Ft, the whole-main-floor number most callers are trying to work out
• Cost for a 12x12 Room, the smallest job worth mobilising for, priced out
• Refinish or Replace?, how much wood is left above the tongue, and what that decides
• Engineered vs Solid Hardwood Cost, the price gap and where each one is the wrong choice
• LVP vs Hardwood Cost, what you give up for the lower number
• Stair Refinishing Cost Per Step, why stairs are priced by the step and not by the foot

What floor work costs in Norwalk

These are the ranges we quote across Norwalk and the rest of the Des Moines metro. Every number is per square foot, and every quote we write states the number of coats, the grit sequence and the finish system, so you can hold it next to another contractor's.

Those are the same rates we quote as our wood floor work across Des Moines anywhere in the metro, the location does not change the price, the floor does. The one thing that moves an Iowa price more than any other is how much wood is left above the tongue, and we check that at a floor register before quoting, so the number you get is the number you pay rather than a change order on day two.

Permits in Warren County

Interior floor work needs no permit in Des Moines or any of the metro suburbs. What it does need is a moisture reading before anything is laid, and a written note of what that reading was, because when a floor cups two winters later, that number is the only thing that settles whether it was the wood, the subfloor or the basement.

Questions we get asked

Should I put solid hardwood over my basement?

Only if the basement is conditioned and stays that way. Otherwise engineered is not a compromise. It is the correct product for the situation.

How flat does the subfloor actually need to be?

Within 3/16 of an inch over ten feet. It sounds fussy. It is the difference between a quiet floor and one with hollow spots.

The house is new, can flooring go in straight away?

The slab and framing still hold construction moisture for months. We test rather than assume, because a floor glued down over a wet slab comes loose and there is no cheap fix.

Nearby areas

Waukee · Johnston · Clive · Altoona · Grimes · Pleasant Hill · Windsor Heights · Indianola

Get a quote in Norwalk

Call . We come out, measure, talk through the finish, and leave a written price. No charge for the visit.