Des Moines Wood Floors: Wood Floor Refinishing in Sherman Hill, IA

Under the carpet in Sherman Hill

Almost every original floor we uncover in Sherman Hill has spent forty years under carpet, and almost every owner apologises for its condition before we have looked at it. They rarely need to. Carpet and pad keep sunlight and shoe grit off wood; the floor underneath is usually flatter, cleaner and darker than the strip visible at the closet door suggests.

What does need attention is the perimeter. Tack strip leaves a line of nail holes eight inches in from every wall, and staples from the pad leave hundreds more. Every one has to come out before the drum sander runs, because a staple left in the floor tears a belt and leaves a gouge that costs more to fix than the hour it would have taken to pull it.

What we are asked for most here: hardwood floor refinishing, hardwood floor restoration, board replacement and weaving, refinish or replace?.

What we install in Sherman Hill

Refinishing and restoration

• Hardwood Floor Refinishing, sanding a floor back to bare wood and building a new finish on top
• Dustless Floor Sanding, sanding with the dust pulled straight off the drum instead of into your house
• Screen and Recoat, abrading the old finish and adding a coat without sanding to wood
• Refinish or Replace?, how much wood is left above the tongue, and what that decides

Refinishing

• Hardwood Floor Refinishing, sanding a floor back to bare wood and building a new finish on top
• Dustless Floor Sanding, sanding with the dust pulled straight off the drum instead of into your house
• Sand and Finish, the full three-pass sand and a fresh coat system
• Screen and Recoat, abrading the old finish and adding a coat without sanding to wood
• Hardwood Floor Restoration, bringing a neglected or carpet-covered floor back into service

Finishes and colour

• Hardwood Floor Staining, changing the colour of the wood before the finish goes on
• Water-Based Polyurethane Finish, the low-odour finish that dries clear and lets you back in sooner
• Oil-Based Polyurethane Finish, the amber-toned finish that wears longest and smells the most
• Hardwax Oil Finish, a penetrating finish you can spot-repair instead of resanding
• Matte, Satin or Gloss, how much sheen hides dust, scratches and Iowa winters

Repairs

• Hardwood Floor Repair, replacing damaged boards and blending them into the existing floor
• Board Replacement and Weaving, cutting out bad boards and weaving new ones in so the repair disappears
• Water-Damaged Floor Repair, drying, flattening and replacing what a leak or a flood lifted
• Squeaky Floor Repair, finding and fastening the movement that makes the noise
• Gap and Cupping Repair, diagnosing whether the movement is seasonal or a moisture fault
• Pet Stain and Scratch Repair, removing urine staining that has reached the wood, and refinishing over it

What it costs

• Hardwood Floor Refinishing Cost, what a sand and finish actually costs in this market, room by room
• Hardwood Floor Installation Cost, material plus labour, and what changes the number
• Cost to Refinish 1,000 Sq Ft, the whole-main-floor number most callers are trying to work out
• Cost for a 12x12 Room, the smallest job worth mobilising for, priced out
• Refinish or Replace?, how much wood is left above the tongue, and what that decides
• Engineered vs Solid Hardwood Cost, the price gap and where each one is the wrong choice
• LVP vs Hardwood Cost, what you give up for the lower number
• Stair Refinishing Cost Per Step, why stairs are priced by the step and not by the foot

What floor work costs in Sherman Hill

These are the ranges we quote across Sherman Hill and the rest of the Des Moines metro. Every number is per square foot, and every quote we write states the number of coats, the grit sequence and the finish system, so you can hold it next to another contractor's.

Those are the same rates we quote as hardwood floor company in Des Moines anywhere in the metro, the location does not change the price, the floor does. The one thing that moves an Iowa price more than any other is how much wood is left above the tongue, and we check that at a floor register before quoting, so the number you get is the number you pay rather than a change order on day two.

Permits in Polk County

Interior floor work needs no permit in Des Moines or any of the metro suburbs. What it does need is a moisture reading before anything is laid, and a written note of what that reading was, because when a floor cups two winters later, that number is the only thing that settles whether it was the wood, the subfloor or the basement.

Questions we get asked

How do I know if my floor can be refinished again?

Pull a floor register and look at the cut edge of the board. You need roughly 3/32 of an inch of wood above the tongue. Less than that and a full sand will expose the fasteners.

There is carpet over it, is the floor worth uncovering?

Almost always, in this part of the metro. Carpet protects wood from sunlight and grit. The floor underneath is usually in better shape than the strip you can see at a doorway.

Can you match a repair to a hundred-year-old floor?

Species and cut matter more than age. Quarter-sawn oak next to plain-sawn reads as a patch no matter how well it is finished, so we match the cut and weave the joints on a stagger.

Nearby areas

Alleman · Cumming · Berwick · Beaverdale · Drake Neighborhood · South of Grand · Waveland Park · Merle Hay

Get a quote in Sherman Hill

Call . We come out, measure, talk through the finish, and leave a written price. No charge for the visit.