Refinishing
- Hardwood Floor Refinishing, sanding a floor back to bare wood and building a new finish on top $2.75 – $5.50 per sq ft
- Dustless Floor Sanding, sanding with the dust pulled straight off the drum instead of into your house $3.50 – $6.50 per sq ft
- Sand and Finish, the full three-pass sand and a fresh coat system $2.75 – $5.50 per sq ft
- Screen and Recoat, abrading the old finish and adding a coat without sanding to wood $2.00 – $4.00 per sq ft
- Hardwood Floor Restoration, bringing a neglected or carpet-covered floor back into service $2.75 – $5.50 per sq ft
Installation
Repairs
Stairs and trim
Finishes and colour
What it costs
- Hardwood Floor Refinishing Cost, what a sand and finish actually costs in this market, room by room $2.75 – $5.50 per sq ft
- Hardwood Floor Installation Cost, material plus labour, and what changes the number $7 – $12 per sq ft installed
- Cost to Refinish 1,000 Sq Ft, the whole-main-floor number most callers are trying to work out $2.75 – $5.50 per sq ft
- Cost for a 12x12 Room, the smallest job worth mobilising for, priced out $2.75 – $5.50 per sq ft
- Refinish or Replace?, how much wood is left above the tongue, and what that decides $2.75 – $5.50 per sq ft to refinish against $7 – $12 per sq ft installed to replace
- Engineered vs Solid Hardwood Cost, the price gap and where each one is the wrong choice $6 – $10 per sq ft installed against $7 – $12 per sq ft installed
- LVP vs Hardwood Cost, what you give up for the lower number $4 – $7 per sq ft installed against $7 – $12 per sq ft installed
- Stair Refinishing Cost Per Step, why stairs are priced by the step and not by the foot $45 – $85 per step
Iowa climate
Not sure which one you need?
Call and describe the space. Most of the time we can tell you on the
phone which of these applies and roughly what it will run, and then come out and measure properly.