Des Moines Wood Floors: Wood Floor Refinishing in Pleasant Hill, IA
Des Moines Wood Floors refinishes, sands, installs and repairs wood floors throughout
Pleasant Hill. Free in-home estimate, usually within two working days.
Hardwood floor refinishing in Pleasant Hill, Des Moines IA
The basement decides the floor in Pleasant Hill
Houses in Pleasant Hill almost all sit on a basement, and that basement is the single biggest influence on how the floor above behaves. Unconditioned. It runs high humidity all summer and feeds moisture into the underside of the boards. The top of the floor dries in the conditioned room, the bottom does not, and the board curls up at the edges.
The floor is not the fault and sanding is not the fix. A dehumidifier held at 50 percent through one summer flattens most cupped floors on its own. Sanding first, while the wood is still wet underneath, removes the crown you will need when it finally dries.
What we are asked for most here: why hardwood floors cup, hardwood over a basement, humidity and hardwood floors in iowa, hardwood floor refinishing.
Dustless Floor Sanding, sanding with the dust pulled straight off the drum instead of into your house
Screen and Recoat, abrading the old finish and adding a coat without sanding to wood
Refinish or Replace?, how much wood is left above the tongue, and what that decides
Refinishing
Hardwood Floor Refinishing, sanding a floor back to bare wood and building a new finish on top
Dustless Floor Sanding, sanding with the dust pulled straight off the drum instead of into your house
Sand and Finish, the full three-pass sand and a fresh coat system
Screen and Recoat, abrading the old finish and adding a coat without sanding to wood
Hardwood Floor Restoration, bringing a neglected or carpet-covered floor back into service
Finishes and colour
Hardwood Floor Staining, changing the colour of the wood before the finish goes on
Water-Based Polyurethane Finish, the low-odour finish that dries clear and lets you back in sooner
Oil-Based Polyurethane Finish, the amber-toned finish that wears longest and smells the most
Hardwax Oil Finish, a penetrating finish you can spot-repair instead of resanding
Matte, Satin or Gloss, how much sheen hides dust, scratches and Iowa winters
Repairs
Hardwood Floor Repair, replacing damaged boards and blending them into the existing floor
Board Replacement and Weaving, cutting out bad boards and weaving new ones in so the repair disappears
Water-Damaged Floor Repair, drying, flattening and replacing what a leak or a flood lifted
Squeaky Floor Repair, finding and fastening the movement that makes the noise
Gap and Cupping Repair, diagnosing whether the movement is seasonal or a moisture fault
Pet Stain and Scratch Repair, removing urine staining that has reached the wood, and refinishing over it
What it costs
Hardwood Floor Refinishing Cost, what a sand and finish actually costs in this market, room by room
Hardwood Floor Installation Cost, material plus labour, and what changes the number
Cost to Refinish 1,000 Sq Ft, the whole-main-floor number most callers are trying to work out
Cost for a 12x12 Room, the smallest job worth mobilising for, priced out
Refinish or Replace?, how much wood is left above the tongue, and what that decides
Engineered vs Solid Hardwood Cost, the price gap and where each one is the wrong choice
LVP vs Hardwood Cost, what you give up for the lower number
Stair Refinishing Cost Per Step, why stairs are priced by the step and not by the foot
What floor work costs in Pleasant Hill
These are the ranges we quote across Pleasant Hill and the rest of the Des Moines metro.
Every number is per square foot, and every quote we write states the number of coats,
the grit sequence and the finish system, so you can hold it next to another contractor's.
Refinishing
$2.75 – $5.50 per sq ft
New solid hardwood
$7 – $12 per sq ft installed
Engineered
$6 – $10 per sq ft installed
Screen and recoat
$2.00 – $4.00 per sq ft
Stairs
$45 – $85 per step
Where it moves
$2 – $5 per sq ft
Those are the same rates we quote as hardwood floor company in Des Moines anywhere in the metro, the location does not change the price, the floor does. The one thing that moves an Iowa price more than any other is how much wood is left above the tongue, and we check that at a floor register before quoting, so the number you get is the number you pay rather than a change order on day two.
Permits in Polk County
Interior floor work needs no permit in Des Moines or any of the metro suburbs. What it does need is a moisture reading before anything is laid, and a written note of what that reading was, because when a floor cups two winters later, that number is the only thing that settles whether it was the wood, the subfloor or the basement.
Questions we get asked
My floor is cupped. Do I need to replace it?
Usually not. Cupping means the underside is wetter than the top, and in a house of this era that is almost always basement humidity. Fix the source, wait, and most floors flatten out.
Is a screen and recoat enough, or do I need a full sand?
If the finish is worn but the wood is not grey and there are no pet stains through to the board, a recoat is enough and costs a third as much. If bare wood shows in the traffic path, it is a sand.